OXYGEN, COMPRESSED

WARNINGS SECTION

WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only.Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment. Patient monitoring is recommended for patient receiving supplemental oxygen. Flow rates for this product are approximate. Federal law restricts this device to sale by or on the order of a physician. Keep out of reach and sight of children. Federal law requires that this container be refilled with Oxygen USP only by establishments registered as a drug manufacturer in accordance with the Federal Food, Drug, and Cosmetic Act.Note: Keep valve minimum 12 inches (30cm) away from magnet opening. Do not move the package during MRI scan, as the MR data quality may be degraded.

Un-Coded Section

MRMR CONDITIONALStatic Field Strength 3.0TStatic Field Gradient 375 Gauss/cmInstructions for use-Operating temperature -4°F to 113°F (-20°C to +45°C)-Only use with devices intended for the product administration. -Prepare to change the cylinder when the pointer on the gauge enters the red area.-to ensure the correct, prescribed flow rate, always make sure that the flow selector is positioned on a numbered flow setting, not between flow settings. 1) Pressure outlet (if provided)2) Shut-off valve3) Gauge4) Flow outlet5) Flow selectorBefore Use:>Check gauge (3) for content.>Check flow selector (5) is set at zero.>Connect equipment to outlet (1 or 4).>Slowly open shut off valve (2) fully by turning counterclockwise.>If equipment is connected to the flow outlet (4) select flow by turning flow selector (5) stepwise up through flow settings.The patient can now be connected to a delivery device. After Use:>Turn flow selector (5) to zero by turning the flow selector stepwise down through flow settings.>Close shut off valve (2) by turning clockwise.>Vent downstream equipment.>Disconnect the equipment from the outlet (1 or 4). 

Batch:DO NOT REMOVE THIS LABELLG015C